ZeoVit Terra Sorbent zeolite for emission reduction

ZeoVit Terra Sorbent (zeolite) for emission reduction
The reconstituted product:
  • For emergency mitigation of leaking toxic materials, chemicals, petroleum products assembled on land and water area; heavy metals, oils, acids, ammonia, methane and so on. recovery, allergic particles to eliminate radioactive pollution and so on. materials collection.
Application areas:
  • energy, industry, railway transport, petrol stations,
  • workshops, garages, supermarkets, livestock facilities,
  • waste containers emission of odor removal,
  • emergency mitigation of leaking toxic materials, chemicals, petroleum products assembled on land and water in the waters,
  • heavy metals, oils, acids, ammonia, methane and so on. materials collection.
Composition:
  • based on natural mineral zeolite it contains up to 75% clinoptilolite.
  • Validity: Storage dry, sealed container is unlimited.
  • Weight: 10kg ± 2%
Operating instructions
Contaminated surfaces. Oil, fuel, coolant, and other materials spill collection
  • Used for pouring spill, oil and grease, gasoline and diesel fuel stains.
  • Soak splits, sweeps and disposed of as for the recovery of oil products.
  • Oil and grease, gasoline, diesel fuel stains with approximately 3-5 cm ZeoVit Terra layer and held until liquid is absorbed.
  • To remove stains, should be maintained for about 24 hours. and once again repeat until stain neišnyks.
  • On water surface spills pollution are collected using a fine sorbent fraction of the water body surface constituting the surface layer, which collects pollution.
  • The collected pollution booms retained and utilized depending on the type of pollution and disposal requirements.
Chemical spill
  • The occurrence of spills, they apiberiami about 3-5 cm thick layer of ZeoVit Terra. When ZeoVit Terra absorbs hazardous to health or the environment, materials, sorbent utilized as absorption materials for the recovery.
Ceramic tile, concrete surfaces
  • ZeoVitTerra collects išliejusius draining liquids and stains from ceramic and concrete surfaces. Sorbent richly sprinkled pollution place.
  • Wait until dry, then wiped out or otherwise collected. To clean stains need to stay longer.
Concrete road and track cleaning
  • Petroleum products and solvents spots apiberiamos ZeoVit Terra layer and allow a longer time (2-3 days), followed by sorbent erected.
  • This procedure is repeated again if the washing of the rain.
Metal and plastic floor cleaning
  • Sorbent swept slippery, sticky shop, garage or automotive service shop floor surfaces absorb spills, car cooling system, brakes, batteries, solvents, liquids, petroleum products and lubricants.
  • Sorbent utilized as absorption materials for the recovery.
Ski tracks and sidewalks cleaning
  • Sorbent sprinkled on sidewalks, paths. It can be used immediately after cleaning the snow.
  • When snow and ice melt, ZeoVit Terra simply wiped out on the grass.
  • To remove an unpleasant smell on contaminated sites need to pour about 3-5 cm ZeoVit Terra layer and maintain until the smell disappears.
Organic waste
  • Waste, domestic waste - the largest unpleasant smell, insects and their larvae source.
  • Their content is reduced or completely withdrawn if the organic waste scattered across ZeoVit Terra, which absorbs different materials and prevents gases, odors and vapors into the environment and significantly reduces unpleasant odors, moisture and worsens the bacteria, insects and their larvae in the breeding conditions.

 

ZeoVit Zeolite Sorbent application areas and techniques

ZeoVit Zeolite Sorbent application areas and techniques

Sewage sludge management by ZeoVit sorbent-zeolite

Sewage sludge management by ZeoVit sorbent (zeolite)